Author: Trbojevic, D.
Paper Title Page
TUPAF08 A Full Field-Map Modeling of Cornell-BNL CBETA 4-Pass Energy Recovery Linac 186
 
  • F. Méot, S.J. Brooks, D. Trbojevic, N. Tsoupas
    BNL, Upton, Long Island, New York, USA
  • J.A. Crittenden
    Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
 
  Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy
The Cornell-BNL Electron Test Accelerator (CBETA) is a four-pass, 150 MeV energy recovery linac (ERL), now in construction at Cornell. A single fixed-field alternating gradient (FFAG) beam line recirculates the four energies, 42, 78, 114 and 150 MeV. The return loop is comprised of 107 quadrupole-doublet cells, built using Halbach permanent magnet technology. Spreader and combiner sections (4 independent beam lines each) connect the 36 MeV linac to the FFAG loop. We present here a start-to-end simulation of the 4-pass ERL, entirely, and exclusively, based on the use of magnetic field maps to model the magnets and correctors. There are paramount reasons for that and this is discussed, detailed outcomes are presented, together with comparisons with regular beam transport (mapping based) techniques.
 
slides icon Slides TUPAF08 [2.568 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-ICAP2018-TUPAF08  
About • paper received ※ 23 October 2018       paper accepted ※ 07 December 2018       issue date ※ 26 January 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPAF09 Multi Pass Energy Recovery Linac Design With a Single Fixed Field Magnet Return Line 191
 
  • D. Trbojevic, J.S. Berg, S.J. Brooks, F. Méot, N. Tsoupas
    BNL, Upton, Long Island, New York, USA
  • W. Lou
    Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
 
  We present a new approach of the Energy Recovery Linac Design for the future projects: PERLE (Powerful Energy Recovery Linac for Experiments), LHeC/FCCeH and eR- HIC. The concept uses superconducting linacs and a single xed eld beam line with multiple energy passes of electron beams. This represents an update to the existing CBETA (Cornell University Brookhaven National Laboratory ERL Test Accelerator) where the superconducting linac uses a single xed eld magnet beam line with four energy passes during acceleration and four passes during the energy recov- ery. To match the single xed eld beam line to the linac the CBETA uses the spreaders and combiners on both sides of the linac, while the new concept eliminates them. The arc cells from the single xed eld beam line are connected to the linac with adiabatic transition arcs wher cells increase in length. The orbits of di erent energies merge into a sin- gle orbit through the interleaved linac within the straight sections as in the CBETA project. The betatron functions from the arcs are matched to the linac. The time of ight of di erent electron energies is corrected for the central orbits by additional correction magnet controlled induced beam oscillations.  
slides icon Slides TUPAF09 [3.935 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-ICAP2018-TUPAF09  
About • paper received ※ 22 October 2018       paper accepted ※ 27 January 2019       issue date ※ 26 January 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPAF13 Calculation of the AGS Optics Based on 3D Fields Derived From Experimentally Measured Fields on Median Plane 209
 
  • N. Tsoupas, J.S. Berg, S.J. Brooks, F. Méot, V. Ptitsyn, D. Trbojevic
    BNL, Upton, Long Island, New York, USA
 
  Funding: Work supported by the US Department of Energy
Closed orbit calculations of the AGS synchrotron were performed and the beam parameters at the extraction point of the AGS [1] were calculated using the RAYTRACE computer code [2] which was modified to generate 3D fields from the experimentally measured field maps on the median plane of the AGS combined function magnets. The algorithm which generates 3D fields from field maps on a plane is described in reference [3] which discusses the details of the mathematical foundation of this approach. In this presentation we will discuss results from studies [1,4] that are based on the 3D fields generated from the known field components on a rectangular grid of a plane. A brief overview of the algorithm used will be given, and two methods of calculating the required field derivatives on the plane will be presented. The calculated 3D fields of a modified Halbach magnet [5] of inner radius of 4.4 cm will be calculated using the two different methods of calculating the field derivatives on the plane and the calculated fields will be compared against the ’ideal’ fields as calculated by the OPERA computer code [6]. [1] N. Tsoupas et. al. ’Closed orbit calculations at AGS and Extraction Beam Parameters at H13 AD/RHIC/RD-75 Oct. 1994 [2] S.B. Kowalski and H.A. Enge ’The Ion-Optical Program Raytrace’ NIM A258 (1987) 407 [3] K. Makino, M. Berz, C. Johnstone, Int. Journal of Modern Physics A 26 (2011) 1807-1821 [4] N. Tsoupas et. al. ’Effects of Dipole Magnet Inhomogeneity on the Beam Ellipsoid’ NIM A258 (1987) 421-425 [5] ’The CBETA project: arXiv.org > physics > arXiv:1706.04245’’ [6] Vector Fields Inc. https://operafea.com/
 
slides icon Slides TUPAF13 [1.772 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-ICAP2018-TUPAF13  
About • paper received ※ 20 October 2018       paper accepted ※ 07 December 2018       issue date ※ 26 January 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)