Keyword: data-acquisition
Paper Title Other Keywords Page
TUPAF16 Analysis of the Beam Loss Mechanism During the Energy Ramp-Up at the SAGA-LS power-supply, electron, storage-ring, acceleration 227
  • Y. Iwasaki
    SAGA, Tosu, Japan
  The accelerator of the SAGA Light Source consists of 255 MeV injector linac and 1.4 GeV storage ring. The accumulated electron beam current of the storage ring is about 300 mA. The energy of the electrons are raised up to 1.4 GeV in 4 minutes in the storage ring. At the moment of the beam acceleration (the beam energy is lower than 300 MeV), the electron beam is lost like the step function. The lost beam current is normally about 5 mA to 30 mA. The beam loss at the energy ramp-up is not observed, when the beam current is lower than 200 mA. To understand the beam loss mechanism, which depend on the beam current, we developed high-speed logging system of 100 kHz for monitoring the beam current and the magnets power supplies using National Instruments PXI. We investigated the relationship between the beam loss and the betatron tune shifts. The tune shifts during the beam acceleration were analyzed from the measured data of the output current of the magnets power supplies by using beam tracking code of TRACY2. By adopting the new high-speed logging system, the time structure of the beam loss process was clearly observed. We will present the high-speed logging system developed for monitoring the beam current and the power supplies at this meeting. The results of the investigation to find the relationship of the beam loss and the tune shifts will be also shown.  
slides icon Slides TUPAF16 [1.286 MB]  
DOI • reference for this paper ※  
About • paper received ※ 19 October 2018       paper accepted ※ 28 January 2019       issue date ※ 26 January 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)